Changzhou Utek Composite Co.,Ltd
Call us on:+86-519-85856360   E-mail: utek@fiberglass-cn.com
Knowledge
Home > Knowledge > Content

Spray up

Changzhou Utek Composite Co.,Ltd | Updated: Oct 29, 2015
Source: Spray up

At the heart of the Spray-Up process is the spray or chopper gun, which simultaneously and uniformly chops the assembled roving, mixes it with the resin, containing initiator, accelerator, filler, pigment and other additives, and directs the mixed stream onto an open mold. The roving is chopped into a specific length. Compaction, wet-out and air-release are accomplished, using a roller as in the Hand Lay-Up process. One good appearance side is possible with this process. The material selection is important. The resin should be easy to atomize. The fiberglass roving should be of moderate stiffness, easy to chop, with good static and ribbon control, ensuring efficient processing.

Product Categories

Fast Track

  • Feedback
    Changzhou Utek Composite Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 1-814,Fuhanyuan, New north district,Changzhou, Jiangsu,China 213002
    Tel: +86-519-85856360    
    Fax: 86-519-85856091    
    E-mail: utek@fiberglass-cn.com
Copyright © Changzhou Utek Composite Co.,Ltd