Changzhou Utek Composite Co.,Ltd
Call us on:+86-519-85856360   E-mail: utek@fiberglass-cn.com
Products
E Glass Stitch Mat 450gsm

E Glass Stitch Mat 450gsm

Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. S titch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open...

Use in close mold applications such as RTM, VARTM, SCRIMP. Can be pultruded when layered with other materials. Stitched construction allows for pattern or die cutting. Stitch Mat will not wash out in RTM process. and can be pre-wet and moved for proper placement in wet lay-up open molding. it gives uniform thickness compared to extra spray-up in open molding. it is low cost alternative for building thickness and stiffness, where the component is not weight critical.
Binderless chopped E-Glass, stitched at 7 gauge
The chopped strand length is 5cm or 10cm, 10cm for pultusion to improve the strength.

Stitch mat advantage:

1. Evenly sistribution 
2. High tensile strength 
3. Undisplacement and undistortion. 
4. Width: 150-3200mm 

Packing & Storage:


Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet vertically stack 9-18 cartons.
The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

Stitch mat advantage:

1. Evenly sistribution 
2. High tensile strength 
3. Undisplacement and undistortion. 
4. Width: 150-3200mm 

Packing & Storage:


Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet vertically stack 9-18 cartons.
The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

Hot Tags: E Glass Stitch Mat 450gsm,Fiberglass Reinforcement
Related Products

Product Categories

Fast Track

  • Feedback
    Changzhou Utek Composite Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 1-814,Fuhanyuan, New north district,Changzhou, Jiangsu,China 213002
    Tel: +86-519-85856360    
    Fax: 86-519-85856091    
    E-mail: utek@fiberglass-cn.com
Copyright © Changzhou Utek Composite Co.,Ltd