Changzhou Utek Composite Co.,Ltd
Call us on:+86-519-85856360   E-mail: utek@fiberglass-cn.com
Products

Carbon Fiber Stitched Fiberglass Veil Mat

Fiberglass mat is a carbon veil (tissue) stitched to chopped strands. Carbon veil is 20G/M2. Chopped Strand is 300G/M2.Stitch type: Tricot stitch on veil side, pillar stitch on CS, also called veilmat. The chopped length is 100mm, Gaugeis F5(space between needles 7mm). Roll Length: Nominal...

Fiberglass mat  is a carbon veil (tissue) stitched to chopped strands. Carbon veil is 20G/M2. Chopped Strand is 300G/M2.Stitch type: Tricot stitch on veil side, pillar stitch on CS, also called veilmat. The chopped length is 100mm, Gaugeis F5(space between needles 7mm).

Roll Length: Nominal linear 200meters +/-1m, the min width is from 150-3000mm.

It is for pultrusion, especially for conductive products,the six-party tube,cable,cable trough.
It is widely used in chemical enterprise,coal-burning enterprises for dust extraction,demist,desulfuration.
Collection coefficient 99.7%,while the traditional water dust removal method collection coefficient is 80%.

Properties:

Anti-static 100000ohm.Carbon fiber is the best of the conductivity conductive medium.
Good adsorption function and high collection coefficient.
Large surface tension and strong rigidity.
Fiberglass no certain direction,good homogeneity.
No powder or emulsion,sink quickly and easy to operate.
High tensile strength,esay to operate.
Good impact strength of finished products.
 
Packing & Storage:

Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet stack 9-18 cartons.
The pallet shall no be higher than 2 layers and the cardboard box shall no be higher than 3 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

 

Hot Tags: Carbon Fiber Stitched Fiberglass Veil Mat,Fiberglass Reinforcement
Related Products

Product Categories

Fast Track

  • Feedback
    Changzhou Utek Composite Co.,Ltd welcomes your comments! Please fill this form to give us feedback or report any problem when experiencing our website.
  • Quick Navigation
  • Contact Us
    Address: 1-814,Fuhanyuan, New north district,Changzhou, Jiangsu,China 213002
    Tel: +86-519-85856360    
    Fax: 86-519-85856091    
    E-mail: utek@fiberglass-cn.com
Copyright © Changzhou Utek Composite Co.,Ltd